News

High-precision laminating machine profile automatic laminating machine six reasons for choosing profile automatic laminating machine:.

1, can replace more than one artificial film, such as profile automatic laminating machine multi-station planning in the film together with any pick and place the workpiece, cut down the intermittent equipment loading and unloading time, and greatly improve the production power, reduce the production cost of enterprises.

2, machine cost-effective, generally three or four months to recover the cost.

3, artificial just pick and place products, film automatically completed.

4, good versatility, in the product transfer only profile profile automatic laminating machine should be based on updated products from scratch to plan the corresponding jigs and fixtures, profile automatic laminating machine itself does not need to make any changes, just change the call to the corresponding program instructions, you can do to update the products and equipment.

5, can choose three-axis robot automatically under the material, and the traditional vibration plate or lifting type comparison, no jamming, volume and noise is smaller, protection is more convenient, roll material laminating machine.

6, the machine is simple and useful, the staff sensitive to grasp the operation and debugging.

　Semi-profile automatic laminating machine is an automatic protective profile profile automatic laminating machine film to the product surface of an automated device in short, it can replace the manual protective film, improve production efficiency and quality, according to the degree of automation can be divided into semi-profile automatic laminating machine, full profile automatic laminating machine.

Semi-profile automatic laminating machine work process.

Core working principle: the sensor detects the product in place or the foot switch sends out a start signal, the suction head that sucks the label descends the platform, the platform backs up and sucks the label, the platform is in place after the suction head descends to attach the product, and then returns to the original position, the label head comes out with a label, waits for the next lamination signal, and the action of attaching a label is completed.

Operation process: put the product -> judge in place (equipment detection control or manual control) -> labeling (equipment automatically achieve) -> remove the labelled product.

Under normal use, you can directly disengage the power cord from the AC outlet or press the emergency stop switch.

Note: Please do not touch the power cord or plug in the power supply when your hands are wet, otherwise it will cause electric shock, and please do not press heavy objects on the power cord, profile profile automatic labelling machine.